標準名稱

?

EN 1329-1 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes@ fittings and the system

EN 1329-1 建筑物內土壤和廢物排放（低溫和高溫）的塑料管道系統.未增塑聚（氯乙烯）（PVC-U）.第1部分：管道,配件和系統規范

?

適用范圍

?

Scope：

This part of EN 1329 specifies the requirements for solid wall unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and the system intended for:- soil and waste discharge applications (low and high temperature) inside buildings (application area code "B"); - soil and waste discharge applications (low and high temperature) for both inside buildings and buried in ground within the building structure (application area code "BD"). NOTE 1 The intended use is reflected in the marking of products by "B" or "BD". NOTE 2 For use buried in ground within the building structure are intended only those components (marked with "BD") with nominal outside diameters equal to or greater than 75 mm.?

?

相關標準

?

ASTM D1525塑料維卡軟化溫度(Vicat)的測定/Standard Test Method for Vicat Softening Temperature of Plastics

?

ISO 306塑料 熱塑性材料 維卡軟化溫度(VST)的測定/Plastics — Thermoplastic materials— Determination of Vicat softening temperature (VST)

?

GB/T 1633熱塑性塑料維卡軟化溫度(VST)的測定標準/Plastics-Thermoplastic materials- Determination of Vicat softening temperature (VST)

?

GB/T 8802熱塑性塑料管材、管件 維卡軟化溫度的測定/Thermoplastics pipes and fitting--Determination of vicat softening temperature

?

ISO 2507.1熱塑性塑料管材和管件 維卡軟化溫度 第1部分:一般試驗方法/Thermoplastics pipes and fittings-Vicat softening temperature - Part 1: General test method

?

ISO 2507-2熱塑性塑料管材和管件 維卡軟化溫度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗沖聚氯乙烯(PVC-HI)管材的試驗條件/Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC

?

BS EN ISO 8442-1與食品密切接觸的材料和物品.餐具和桌上餐盤.食品制備用餐具的要求/Materials and articles in contact with foodstuffs. Cutlery and table hollowware . Requirements for cutlery for the preparation of food

?

EN 1329-1建筑物內土壤和廢物排放（低溫和高溫）的塑料管道系統.未增塑聚（氯乙烯）（PVC-U）.第1部分：管道,配件和系統規范/Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes@ fittings and the system

?

BS 5577非金屬手柄餐桌用刀叉餐具規范/Specification for table cutlery with non-metallic handles

詳情請咨詢：中科易朔防火技術服務有限公司

出自GF2022