AS 6669膠合板-模板
AS 6669膠合板-模板—測試標準
AS 6669 Plywood-Formwork
AS 6669膠合板-模板
?
AS 6669膠合板-模板—測試范圍
This Standard specifies requirements for the manufacture, grading, finishing and branding of plywood used specifically in formwork, with a maximum length of 3100 mm and width of 1500 mm, intended to meet off-form surface finish requirements of Classes 2, 3, 4 and 5 as specified in AS 3610.1
?
AS 6669膠合板-模板—檢測項目及方法
AS/NZS 2098.4 ?Dimensions(Thickness,Length,Width) 尺寸(厚度、長度和寬度)
AS/NZS 2098.4? Squareness 垂直度
AS/NZS 2098.4? Straightness of edges 邊直度
AS/NZS 2098.4? Flatness 翹曲度
AS/NZS 2098.1? Moisture content含水率
AS 6669? Edge finish邊緣加工
AS 6669 見4.2/5.4 Joints in sheets 粘接性能
AS/NZS 1604.1 Immunization of lyctid-susceptible sapwood 木質抗蟲性
AS/NZS 2098.11? Formaldehyde emission 甲醛釋放量
AS 6669? Veneer quality 單板質量
AS 6669? Formwork plywood surface quality表面質量
AS/NZS 2098.3Type1 Structural joints in formwork plywood sheets 結構節點膠合質量
AS/NZS 2098.2(Type 2)
AS/NZS 2098.2 Bonding膠合強度
Requirements for overlays 覆蓋層要求
Annex F2 Overlay adhesion test 附著力測試
Annex F3（AS/NZS 2098.2 Type A) Bond quality and bond durability 粘接質量和耐久性
Annex F4 Overlay cure test 覆蓋層固化測試
Annex F5 Water permeability滲水性
Veneers of determined elastic modulus單板彈性模量
?
Mechanically F-graded formwork plywood sheets F-graded?? 5.3, 5.4 任選一種方法
膠合板模板片材F分級：
AS/NZS 2269.1 7.1? Bending strength彎曲強度
AS/NZS 2269.1 7.2? Modulus of elasticity 彈性模量
AS/NZS 2269.1 7.4? Panel shear strength 剪切強度
?
In-grading testing(Stress grade) 等級測試（應力等級）：
AS/NZS 2269.0 Appendix B Section properties截面特性
AS/NZS 4063.1 and AS/NZS 2269.1? Characteristic strengths特性強度-Bending 彎曲
AS/NZS 4063.1 and AS/NZS 2269.1 Characteristic strengths特性強度-Panel shear 剪切
AS/NZS 4063.1 and AS/NZS 2269.1 Average modulus of elasticity 表觀彈性模量
詳情請咨詢：中科易朔防火技術服務有限公司
出自GF2021
