K55 CuNi3Si1Mg銅合金耐化學腐蝕性好

U Pb20 E? French standard / AFNOR? Cu Pb15 Sn (Cu Pb15 Sn7), CC496K

U-A9 N5 Fe Y200? French standard / AFNOR? SS 5716-15 (Cu Al10 Ni5 Fe4 F70), AB-200

LM’s comparison list between different

norms from Copper alloys

Please read below on the wished for trade-name in the left hand column, and get it translated into LM-language on the right-hand

現在的塑膠模具制造當中已有越來越多開始使用鈹銅模具材料，且出現不斷上升的趨勢，造成這一現象的原因是什么呢？跟隨小編一起來了解鈹銅在塑料模具上的運用，以及原因。

1.足夠的硬度和強度：在經過很多次的試驗之后，工程師才能夠找出以及掌握鈹銅合金zui佳的沉淀析出的硬化條件以及zui佳工況還有鈹銅的彌撒特性（這一點是鈹銅合金以正式產品開始應用在市場的前奏）；鈹銅材料應用在塑膠模具之前是需要經過多次輪回的試驗來zui終把zui佳的符合制造以及加工的物理特性和化學成分確定下來；理論與實踐的證明–鈹銅的硬度在hrc36-42時能夠達到適用于塑膠模具制造要求的硬度、強度、高的導熱率，機加工簡易方便、模具使用壽命長的特點以及節省開發生產周期等。

2.良好的導熱特性：鈹銅材料的導熱特性有利于控制塑料加工模具的溫度，也更容易控制成型周期，同時可以保證模具壁溫的均勻性；如果與鋼模相比，鈹銅的成型周期要小的多

column. The right hand column with our name is either identical in composition or a fully replaceable alloy with only minor

differences. The column in the middle states the norm and its country of origin.

With no marks in front of LM’s alloy = alloy is identical, with this sign “~” = alloy is very similar, fully replaceable.

Product name Country of origin LM’s trade name by or order/inquiry

UZ23 A4? French standard / AFNOR? SS 5234 (Cu Zn25 Al 5, SoMsF75), CC762S

UZ40 Mn? French standard / AFNOR CW710R (Cu Zn35 Ni3 Mn2 Al Pb, Sonderm.)